The Portico 542’s “True Tape” emulation circuit provides the nostalgic rounding and compression usually only achieved by the use of tape, and can offset the harshness often found in digital recordings. Unlike digital emulations, the “True Tape” drive circuit works by feeding a tiny magnetic “record head”, whichin turn is coupled to a correctly equalized, replay amplifier. As the voltage rises on the “record head”, saturation increases, and a soft clip circuit engages at higher levels to round off peak transients. The sound of the tape circuit can be further modified with selectable 15 / 30 IPS modes and a pre/post-tape blend control. In addition to the tape circuit, the 542 also has the variable Silk & Texture circuitry found in the Portico II series of modules, which allows the engineer to fine-tune the harmonic ratio and tonality on the output transformer.
Getting the Most Out of the Rupert Neve Designs Portico 542 Tape Emulator While in the olden days, tape’s non-linearity was generally looked upon as more of a curse than a “feature”, the advent of digital systems that operate in a completely linear fashion has made many appreciate the quirks of non-linear audio processing. Unlike linear designs, non-linear devices require the user to actively experiment with gain staging to find the “sweet spot” of the circuit. Although this requires a small amount of effort on part of the engineer, if used properly, the effect can add a dynamic aspect to performances that can enhance the impact of a song.
The non-linearity in the 542’s “True Tape” circuitry and Saturation control necessitate taking note of both drive and input levels. How levels are staged into the 542’s tape circuit can significantly impact tone, depending on the position of the saturation control and the drive level on the tape circuit. As saturation is increased, low frequency compensation is decreased, and at a drive level of 5 the soft clipper enters the circuit. Finding the best balance point between low frequency response, total harmonic distortion, and desired soft clipping require playing with a combination of the saturation, trim and blend controls, and may also include using dynamics processing and proper gain staging before the 542.
As a rough guide, we recommend starting with an input signal from around 2-10dBu and applying saturation, 15 / 30 IPS, Silk, and blend to taste. However, it always behooves the engineer to experiment with the balance between the pre-tape signal level and the level of the saturation control to find the best results for each source.
To get a better idea of what is happening at different saturation and “Tape Head” levels, look through the frequency response and THD by frequency response graphs in the Technical Specifications section at the end of the manual.
Also, like a real tape machine, the flux loops in the “True Tape” circuitry can pick up signals from strong nearby magnetic fields (The most likely sources are nearby power supplies, power amplifiers and computer monitors). Although we have shielded both the unit as a whole and the tape circuit to minimize stray inductance, if you have issues with hum when engaging the tape circuit, try moving the 542 to other spots away from magnetic field radiators until the hum subsides.
Adding Texture - Rupert Neve Designs Portico 542 Tape Emulator Both Silk modes are modified and fine tuned by the “Texture” control. By manipulating the Texture control, the amount of Silk can be changed from essentially absent, to roughly four times the amount of coloration found in Silk from the original Portico Series. With Silk / Texture engaged, the distortion characteristic and harmonic content of the unit are very reminiscent of many of Rupert’s vintage class-A designs. These controls add another realm of tonal control to the 542, and should be explored creatively in conjunction with the “True Tape” for best effect.
Designed for 500 Series by Mr. Rupert Neve
Rupert Neve: “While creating functional 500 Series modules is relatively simple, designing those modules to equal their non-500 series counterparts with the current, voltage and space restraints is quite challenging. In creating our Portico 500 Series Modules, we experimented with a number of different transformer and circuit designs to achieve the same presence and sweetness found in the Portico Series of modules. The result of these efforts is that outside of the slightly lowered headroom, our 500 series modules are nearly indistinguishable from standard Portico Series modules, and are perfectly suited for studios of the highest-caliber.”
The Portico 542 consists of a line driving amplifier having transformer balanced inputs and outputs. The sonic quality of these amplifiers is such that by providing galvanic isolation, simple single-sided circuit topology and freedom from grounding problems, they are capable of enhancing the sonic quality of many signal sources, especially those of digital origin. The sonic “signature” is one of extreme purity and the image is consistent with that of Rupert Neve’s original designs of 35-40 years ago.
To ensure 100% customer satisfaction , we offer a 14 day return policy and price matching. Our knowledgeable staff are here to help with queries you may have about the , prices in Singapore , stock availability etc. We will help you to select from the best products available. Contact our experts to find the best product to suit your style or request more information about the .
- Buy products with confidence.
- We ship to all major regions in Singapore.
- Return to base repair or replacement (1 Year return to base).
- Please contact us for detailed information about our terms , conditions and warranty.
AudioBuy Singapore ship all stocked orders Monday to Friday. All online orders are carefully packed and insured before dispatch. Our customers are very important to us and we will work with you until final delivery to ensure you're completely satisfied.
|Condition||Sealed / New|
|Delivered Price||Shown at checkout|
Look no further than AudioBuy when buying gear online in Singapore , always at the lowest price with free shipping to all locations serviced by FEDEX. Please contact us for stock availability , price quotes , expedited shipping quotes or to arrange a return of your (for the full purchase price of ). You may return most new, unopened items within 30 days of delivery for a full refund. AudioBuy Singapore are very proud to carry a large selection of gear. You demand quality, reliability, and innovative design from your gear, and we're here to help you find exactly what you need. We're glad to answer any questions you have and you can always depend on AudioBuy Singapore to give you the best possible value on musical instruments and accessories with responsive customer service.
Frequently Asked Questions
How do I check for stock levels?
Email "firstname.lastname@example.org" to enquire about current stock levels for the . We aim to stock popular items at all times and are able to quickly order in products if they are currently not in stock. In the event of product backorder or product discontinuation your order will be cancelled and a payment request (Paypal) will not be processed.
Do we ship products internationally?
Yes. AudioBuy ship the majority of products to all international locations serviced by FEDEX. You will be notified during checkout if your order is unable to be delivered to your region due to manufacturer restrictions and/or other shipping restrictions. All listed prices are inclusive of FEDEX shipping costs.
What is the process after I checkout?
Following checkout your order number will be generated and stock availability confirmed before a Paypal invoice is emailed to your registered email address. If your order is not in stock and cannot be shipped within 10 business days then your order will be cancelled. If your order is in stock or can be ordered from the manufacturer for FEDEX dispatch within 10 business days then we will email a Paypal invoice to complete payment.
When do I pay?
You do not pay at checkout. If your order is in stock or readily available from the manufacturer then a Paypal payment request (invoice) will be emailed to you 2-24 hours following checkout. This is to ensure that we do not collect payment for orders which cannot be promptly dispatched and delivered.
When will my Paypal invoice arrive?
Following checkout your Paypal invoice will be emailed to you within 24 hours if your entire is in stock or readily available with the manufacturer.
When will my order be delivered?
Following Paypal payment your order will be FEDEX dispatched within 1-2 business days if your order is in stock. If your order is only in stock with the manufacturer then we will require up to 10 business days to FEDEX dispatch your order. After your order has been shipped we will email your FEDEX tracking number to the email address you provided during checkout / account sign-up. The average FEDEX transit time is 3-5 business days to most international locations.
Can you price match with another retailer?
Yes. Contact "email@example.com" with the product name and the competing website's URL. Our total price including FEDEX delivery is currently . When comparing prices with other retailers be aware that their prices may not include international FEDEX shipping costs.
Do we sell used or second hand products?
No. AudioBuy only sell brand new and sealed products which are sourced from the respective and legitimate manufacturer ( ).
Do I need to have a Paypal account to complete payment?
No. Paypal provide the option of completing payment with your Paypal account if you are already a member , if you do not have a Paypal account you will be prompted to complete payment using a debit or credit card. All Paypal payments are subject to approval and will be promptly refunded if AudioBuy or Paypal review the transaction to be unauthorised.