The microphone is powered by a single 1.5V AA battery, included. The AA battery provides optimal performance with high max SPL. A red/green LED power indicator, located on the top of the unit, illuminates green when the microphone is sufficiently powered and red when battery power is low.
The AT8024 is equipped with a three-position input pad that allows for attenuation adjustment. The microphone also features an 80 Hz high-pass filter switch that permits choice of flat response or low-frequency roll-off to reduce the pickup of undesired ambient noise, room reverberation and mechanically coupled vibrations.
The microphone is enclosed in a rugged housing and includes an integral shoe mount that fits most camera shoes. Two rubber shock mounts isolate the microphone from vibration and mechanical camera noise. The microphone includes a permanently attached cable with a 3.5 mm (1/8") L-type stereo plug output. A clip on the shoe mount holds the cable, relieving tension and preventing vibration noise.
A windscreen and fuzzy windscreen are also included.
Operation & Maintenance The mode switch located on the top of the unit allows user to select between mono and internally matrixed mid-side stereo modes.
Mono Operation: In Mono mode, the microphone uses its line-cardioid element exclusively to provide excellent off-axis rejection. This is ideal for recording interviews, dialogues or sound sources that might otherwise be drowned out in noisy environments.
Mid-Side Stereo Operation: In Stereo mode, the microphone provides internally matrixed mid-side stereo, delivering wide, life-like stereo sound. Locating the AT8024 nearer the sound source will enhance the apparent width of the stereo image, while decreasing room ambience. Moving the microphone away from the sound source will narrow the stereo image and provide more "room sound." The Stereo mode is well-suited for sporting events and other active situations where sonic realism is desired.
The integral shoe mount slides into the shoe of most cameras. Tighten the nut on the shoe mount to hold the microphone securely in place. The shoe mount is also equipped with a strain-relief clip for the cable. Insert the cable into the clip to reduce wear on the cable and eliminate noise from cable vibration.
To install the battery, press the PUSH button located on the side of the unit. This will eject the battery compartment. Insert a 1.5V AA battery according to the polarity markings in the compartment, then press the compartment back into the body of the unit so that it clicks closed. When the mode switch is moved from the Off position to Mono or Stereo, the LED power indicator will illuminate green, showing that the microphone has power. Replace or recharge the battery when the LED illuminates red.
The attenuation can be adjusted by using the three-position input pad switch (-20 dB, -10 dB, 0 dB) located on the top of the unit. Adjust according to the volume of the sound source: -20 dB for the loudest sounds, 0 dB for the softest. The 80 Hz high-pass filter switch is located alongside the input pad switch. To engage the high-pass filter, slide the switch toward the "bent" line.
Since even slight or unexpected winds can adversely affect audio recordings, it is best to use the microphone with the supplied windscreen or, when recording in especially windy environments, the supplied fuzzy windscreen.
Avoid leaving the microphone in the open sun or in areas where temperatures exceed 110* F (43* C) for extended periods. Extremely high humidity should also be avoided.
Audio-Technica AT8024 Camera Mount Microphone Features
- Designed for use with DSLR and other video cameras, delivering dramatically better sound quality than the camera's internal microphone
- Selectable line-cardioid mono or mid-side stereo modes provide the flexibility to capture high-resolution audio in any environment
- Three-position adjustable input pad and switchable low-frequency roll-off
- Integral rubber shock mounts isolate the microphone from vibration and mechanical camera noise
- Compact, lightweight design with integral shoe mount
Following checkout you will receive a Paypal invoice if your order is in stock or readily available with the manufacturer. Your Paypal account , credit card or debit card will not be charged if your order is not in stock or available with the manufacturer. In stock orders are shipped within 1-2 business days (FEDEX tracking details provided). Un-stocked orders require a special order from the manufacturer and ship within 7-10 business days.
To ensure 100% customer satisfaction , we offer a 14 day return policy and price matching. Our knowledgeable staff are here to help with queries you may have about the , prices in Singapore , stock availability etc. We will help you to select from the best products available. Contact our experts to find the best product to suit your style or request more information about the .
- Buy products with confidence.
- We ship to all major regions in Singapore.
- Return to base repair or replacement (1 Year return to base).
- Please contact us for detailed information about our terms , conditions and warranty.
AudioBuy Singapore ship all stocked orders Monday to Friday. All online orders are carefully packed and insured before dispatch. Our customers are very important to us and we will work with you until final delivery to ensure you're completely satisfied.
|Condition||Sealed / New|
Contact us for stock availability , price quotes , expedited shipping quotes or to arrange a return of your (for the full purchase price of ). You may return most new, unopened items within 30 days of delivery for a full refund. AudioBuy are very proud to carry a large selection of gear. You demand quality, reliability, and innovative design from your gear, and we're here to help you find exactly what you need. We're glad to answer any questions you have and you can always depend on AudioBuy to give you the best possible value on musical instruments and accessories with responsive customer service.